Expert Edwards Solar Hot Water Repairs Gold Coast
Fast, reliable repairs for Edwards solar hot water systems across the Gold Coast. If your Edwards solar hot water system is leaking, only producing lukewarm water, or the booster has stopped working, we can help.
- Same-day service at no extra costs
- Fully stocked vehicles
- Upfront, clear pricing
- Solar accredited specialists
- Workmanship guaranteed
- Over 23 years experience
Edwards Solar Hot Water Systems We Service
We work on most existing residential Edwards solar models. Even though Edwards is now under Rheem, most parts and equivalent replacements are still available.
1Edwards L Series – Roof-Mounted Stainless Steel (Close-Coupled)
- Storage cylinder and solar collectors mounted together on the roof
- Thermosiphon design – as water heats, it rises into the tank
- Cylinders made from marine-grade 316 stainless steel
- Electric or gas boosting options
2Edwards LX Series – Indirect / Closed-Circuit
- Stainless steel tank with internal heat exchanger
- Collectors and heat exchanger form a closed circuit
- Filled with heat-transfer fluid for frost protection
- Suited to colder or frost-prone areas
3Edwards Split & "Solar Edwards" Systems
- Roof-mounted collectors with a ground-level tank
- Often branded as Solar Edwards
- Still using stainless steel cylinders and high-efficiency panels
- Electric or gas boosting via in-tank elements or external boosters
Common Edwards Solar Hot Water Problems We Fix
These are the most frequent issues we see and repair daily across Gold Coast and Brisbane.
No Hot Water or Only Lukewarm Water
Showers are cold or just lukewarm, and hot water runs out very quickly, especially mornings and nights.
Likely Causes:
- Booster element or thermostat failure in the tank
- Tripped breaker or faulty isolator
- Solar collectors dirty, shaded or underperforming
- Undersized system for current household usage
Our Fixes:
- Test the electric element and thermostat
- Check power supply, breakers and rooftop isolators
- Inspect collectors for shading, dirt and damage
- Review system sizing vs usage
Edwards Solar System Leaking
Drips from around the roof-mounted tank or collectors, rust streaks on the roof or walls, or puddles under the tank or at relief valve outlets.
Likely Causes:
- Internal tank corrosion or weld failure
- Split collector headers or pipes on the roof
- Perished seals, unions and compression fittings
- Excessive mains pressure stressing joints and valves
Our Fixes:
- Pressure-test the system
- Replace faulty valves, unions, fittings and short runs of copper
- Recommend panel replacement if collectors are split
- Provide repair vs replacement options if tank shell is compromised
Booster Not Working (Electric or Gas)
Water is okay after several days of sun, but cold after cloudy weather. Water never gets truly hot at night, only lukewarm.
Likely Causes:
- Burnt-out electric element
- Failed thermostat or incorrect temperature setting
- Tripped circuit breaker or faulty isolator
- For gas-boosted systems, ignition or gas supply issues
Our Fixes:
- Test and replace elements, thermostats, fuses or breakers
- Verify wiring and isolators are safe and compliant
- Check ignition, gas supply and error indications for gas boosters
- Re-set boosting schedules
PTR Valve Constantly Dripping
Continuous trickle from the PTR drain line or occasional heavy discharge ('dumping' water) after showers or heavy use.
Likely Causes:
- Normal thermal expansion
- Worn or scaled PTR valve
- Excessive mains pressure with no pressure-limiting valve
- Overheating due to thermostat or controller issues
Our Fixes:
- Measure mains and system pressures, fit pressure-limiting valve
- Exercise the PTR lever and, if still leaking, replace the valve
- Check thermostat/booster settings
- Inspect tempering valve
Edwards Roof Tank Has Failed
Tank has visible rust or staining around welds or fittings, multiple small leaks that keep returning, or unit is older than 15–20 years.
Likely Causes:
- Tank shell corrosion over time
- Harsh water conditions causing internal rust
- Weld failures from age and pressure
- General end of life deterioration
Our Fixes:
- Assess whether a direct tank swap is viable
- Price options for new stainless or glass-lined solar systems
- Make sure any replacement is correctly sized and oriented
- Provide modern heat-pump alternatives
Why Gold Coast Locals Choose Todd's for Edwards Solar Repairs
When you call us, you speak directly with a local team—not an offshore call centre. Get your Edwards system running perfectly again.
"Faultless service and highly recommended! After contacting some local plumbers to assist with an issue with my SHW and being given the run-around, Todd's were excellent... Onsite service was prompt, professional and explained everything completed."
- S M
Get A Free Quote
Fill out the form below and we'll get back to you immediately
FAQ – Edwards Solar Hot Water
Common questions about Edwards solar hot water systems.
No Hot Water? We Can Help!
Speak with our local Gold Coast team now. Same-day service available to get your hot water back on.