Do you repair Leda heat pump systems?

Leda is primarily a solar/tank brand. We repair Leda storage/solar systems paired with third-party heat pumps, including controls, sensors, booster and valves.

Why is my Leda + heat pump setup only giving warm water?

Likely causes include sensor faults, restricted airflow, low ambient operation or booster issues. We diagnose and restore efficient operation.

The PTR valve keeps dripping — is that normal?

Occasional discharge is normal during heating. Continuous flow suggests pressure/temperature problems or a worn valve; we test and replace if required.

Can you check my solar loop as well?

Yes. We verify differential controllers, pumps and non-return valves so the solar and heat pump don’t conflict.

Call Now

Workmanship Guaranteed

Licensed & Insured

Upfront Fair Pricing

Finance Available

Leda Heat Pump Repairs & Servicing

Gold Coast’s Leda Tank + Heat Pump Integration Specialists

Got no hot water, lukewarm water, a PTR valve that won’t stop dripping, or a noisy fan/compressor on a heat-pump-equipped Leda setup? Todd’s Plumbing & Electrical diagnoses and repairs Leda solar/storage systems that run with add-on heat pumps across the Gold Coast. We handle the tank, valves and plumbing as well as the heat pump electrics, sensors and controls.

📞 Call 0482 080 423 for same-day service
or request a free quote online.

Why choose Todd’s

Leda solar/storage know-how — experienced with 270 L / 340 L / 450 L Leda tanks and plumbing layouts.
Heat pump specialists — we fix fan/compressor issues, sensors, controllers, booster elements and drainage on popular retrofit heat pumps.
Dual-trade team — licensed plumbers + electricians in one visit.
Warranty-safe work — we don’t bypass safety devices; we follow best practice on solar/hybrid integrations.
Local & fast — Gold Coast family business with 20+ years in hot water.

Common issues on Leda + heat pump setups we fix

No hot water / lukewarm
Thermostat/sensor faults, compressor not starting, booster element failure, restricted airflow, or tariff timing.
PTR (TPR) valve constantly dripping
Some discharge is normal; a steady stream suggests high pressure/temperature or a worn valve. We test/replace valves and confirm correct relief rating and drain routing.
Unit runs constantly / short cycling
Dirty or iced coil, blocked air path, low ambient operation, control/PCB faults, or system undersizing.
Noise & vibration
Fan bearing wear, debris on the evaporator, loose mounts, or compressor issues.
Error codes / controller faults
We read fault indications (where supported), test thermistors/sensors and wiring, and replace failed boards or components.
Condensate/drainage problems
Blocked condensate line or incorrect connection into relief drain causing pooling around the base — we clear and reroute.
Solar-hybrid quirks
On Leda solar tanks with controllers/pumps, we check non-return valves, differential controllers and sensor placement to ensure the heat pump and solar loop don’t fight each other.

How these systems are set up (plain English)

Tank: A Leda storage/solar cylinder (commonly 270/340/450 L) provides mains-pressure hot water.
Heat source: A retrofit heat pump unit (brand varies) adds efficient heating; an electric booster element may assist in cold weather or fault mode.
Controls & safety: Temperature sensors/thermistors, controller/PCB, PTR valve and expansion valve protect the system.
Solar options: Older Leda systems may retain solar collectors and a differential controller/pump — we ensure correct integration with the heat pump so performance remains stable.

We service the tank/valves/anodes, heat pump fan/compressor/coil, sensors/PCB, booster element, condensate, and solar controls (if present).

Our Repair & Service Process

Diagnosis — electrical tests; sensor resistance checks; airflow/coil inspection; valve, pressure and safety tests; tariff/controls review.
Clear quote — options, parts and timelines before any work.
Repair — genuine/compatible parts; no shortcuts.
Commissioning — temperature/pressure verification, leak & safety checks, timer/off-peak optimisation.
Care tips — simple settings to reduce bills and extend system life.

Typical Service

Diagnostic & quote
Sensor/controller/element repairs
PTR valve replacement & safety test
Annual preventative service
Major components (fan/compressor/coil) — quoted after inspection
Final price varies by model, age and access. We’ll confirm before starting.

Areas We Service

We provide Leda heat pump repair and servicing throughout the Gold Coast, including:
Southport, Labrador, Arundel, Parkwood, Helensvale, Hope Island, Coomera, Pimpama, Runaway Bay, Biggera Waters, Benowa, Bundall, Broadbeach, Mermaid Waters, Burleigh Heads, Burleigh Waters, Varsity Lakes, Robina, Carrara, Nerang, Mudgeeraba, Elanora, and Palm Beach.

Wherever you are on the Gold Coast — we’re nearby and ready to help.

Get Your Hot Water Working Again Today

📞 Call Todd's Now: 0482 080 423

Don’t put up with cold showers or a noisy unit. Our licensed team can diagnose, repair and optimise your Leda + heat pump system quickly.

Same day service
All brands and models serviced
Upfront fair pricing
20+ years local experience
Fully licensed and insured
Workmanship guaranteed

Todd's plumbers and electricians are qualified and licensed experts in all aspects of heat pump repairs.

If it can't be fixed we can supply a new system from as little as $24 a week

Leda heat Pump repairs frequently asked questions

Do you repair Leda “heat pumps”?

Leda is best known for solar hot water/tanks, not a current, dedicated heat pump model. Most calls we attend are Leda tanks paired with third-party heat pumps — and yes, we repair those integrations (tank, valves, sensors, controller and the heat pump unit).

Why am I only getting warm water?

Likely causes include sensor/thermostat faults, restricted airflow across the coil, low ambient operation (booster not engaging), or incorrect timer/tariff scheduling. We test and fix the root cause.

The PTR valve keeps dripping — normal?

A brief trickle during heating is normal. Continuous flow can mean pressure/temperature is too high or the valve is worn. We test/replace the valve and verify pressures.

Can you work on the solar side too?

Yes. If your Leda tank still uses solar collectors and a controller/pump, we check sensors, pump operation and non-return valves, and ensure the heat pump + solar loop are commissioned correctly.