Workmanship Guaranteed
Licensed & Insured
Upfront Fair Pricing
Finance Available
Sea haze, onshore winds and tight beachside access can chew through solar hot water gear in Palm Beach. If your system has slid from hot to “only warm,” the booster keeps napping, or there’s a rust ring on the slab, Todd’s Plumbing & Electrical will track the fault and fix it properly. We’re on both sides of the highway — from Jefferson Lane and Palm Beach Parklands down to Currumbin Creek and up to Tallebudgera Creek — and we often restore hot water the same day.
Same-day solar hot water repairs in Palm Beach by one crew: licensed plumber + licensed electrician
We fix pumps, controllers, roof sensors, boosters, tempering/relief valves, leaks and collector flow
Temporary hot water units available if a specialty part is on order
Fixed price before tools come out, with photo notes for strata/insurance
Salt haze + wind: Beachfront fittings and unions along Jefferson Lane corrode early; collectors cop uplift gusts — we check clamps, flashing and wiring, not just parts.
Timer drift after blips: Short outages around GC Hwy work sites leave controllers off by an hour; boosters miss their window and evenings stay lukewarm.
Lazy circulation: Airlocks or tired pumps on older split systems mean rooftop heat never reaches the tank.
Sensors lying to controllers: Roof probes can read 10–20 °C off, so the system “thinks” storage is warm.
Valve weeps that stain: Tempering/relief valves leave rust rings on slabs near sea air — looks like a dead cylinder, often isn’t.
Pumps • non-return & tempering valves • controllers & roof sensors • electric/gas boosters & elements • leaking joints & relief valves • collector/flow faults • thermostats & wiring
Verify — measure collector temps/flow, confirm booster draw, sanity-check controller logic.
Explain — what failed and why, in plain English, with a fixed price.
Repair — stocked truck, safe roof access, tidy finishes.
Prove — storage temp & tempering set correctly; photo notes left for records.
Fallback — fit a temporary unit if parts are inbound.
If the cylinder is sound and one component failed, repairing is best value. If the tank body’s corroded or faults keep repeating, we’ll quote a sensible solar or heat-pump replacement sized to your roof, tariff and household. We handle supply, installation, disposal and warranties.
We fine-tune booster timing and controller logic so solar does the heavy lifting, and we tidy/insulate exposed lines where practical — lower bills, steady hot water.
Snap the tank label (brand/model/size) and text it through.
Note any error lights/codes and whether the controller clock looks right.
Active leak? Close the isolation valve near the tank.
Power tripping? Switch off the HWS breaker until we arrive.
Laneway parking on Jefferson Lane, surf-day winds on exposed roofs, tight duplex side paths, and strata rules near Palm Beach Parklands — we book access, bring the right anchors and keep common areas clean.
Rheem • Rinnai • Solahart • Envirosun • Stiebel Eltron • Chromagen (and others). Older/discontinued models welcome — we source compatible parts or suggest a smart upgrade.
Often, yes — early calls help. If a specialty part is needed, we’ll fit a temporary unit so you’re not without hot water.
Typically the booster missed its window, the pump isn’t moving heat from the roof, or a roof sensor is lying to the controller. We test all three before replacing anything.
Not always. Relief/tempering valves can weep and stain in salt air. If the tank skin is perforated, we’ll show clear proof; otherwise it’s a targeted repair.
Yes. We plan parking on Jefferson Lane, protect surfaces, and keep stairwells/balconies tidy.
Absolutely. We’ll size solar or heat pump to your usage, roof and tariff, install it, and remove the old unit.
Aquamax
Apricus
Beasley
Bosch
Chromagen
Conergy
Dux
Ecosmart
Envirosun
Edwards
Everhot
Hills
Leda
Quantum
Midea
Neopower
Reece
Rheem
Rinnai
Sanden
Saxon
Stiebel Electron
Solahart
Solargain
Solar Oz Solar
Power Sun Ray
Sun Solar
Thermasun
Vulcan